Table of Contents
Advertisement
important note
It is very important that the AV menu setup is adjusted correctly when connecting external
equipment to your TV - the incorrect setting may lead to picture breaking and splitting.
...notes on using VCR's, camcorders and LaserDiscs played
through AV input
The AV SETUP menu is used as a means of instructing your television to recognise what
external equipment is being connected to your TV's scart, S-VHS and/or phono sockets. If you have
any equipment connected to your TV (either permanently, like a VCR, or temporary, like a
6
Use the UP/DOWN cursor keys to select
7
8
Once highlighted, accept selection.
22
camcorder) it is important that your TV recognises which kind of equipment
is connected. For VCR's, camcorders and LaserDiscs the appropriate AV
VCR mode should be set to ON in the menu. This helps to provide a steady
picture when playing back a recorded picture. If an S-VHS or Hi8 piece of
equipment is to be used, these should be connected to either AV1 or AV3.
Press and hold the MENU
1
INSTALL option in
the MAIN MENU appears.
Press the cursor
2
DOWN button to
select INSTALL .
Once highlighted,
3
accept selection.
Press the cursor DOWN
4
button to select
5
Once highlighted,
accept selection.
AV to adjust.
Adjust chosen AV by using the
LEFT/RIGHT cursor buttons.
button for 5
seconds. The
AV SETUP .
Advertisement
Table of Contents
