Table of Contents
Advertisement
problem identification
No picture or picture is jerky
or blocking.
Intermittent interference on
digital. This may appear as
certain parts of the screen
'freezing' (blocking).
VCR not recording analogue
programmes.
Cannot receive new services,
or can no longer receive some
old ones.
possible cause
Aerial incorrect type.
Not enough signal to TV.
Check digital services
availability - Postcode test
(see dealer)
Poor cabling between aerial
and TV point.
Poor connection in TV point.
Poor connection between
TV point and TV.
Not enough signal to TV.
Interference from nearby
electrical sources.
TV is switched off.
Need to repeat tuning
process.
remedy
Replace aerial on
advice from dealer.
Connect aerial to digital
input on TV first.
Replace cable with
double shielded type.
(CT100/CT125 satellite
cable).
Replace wall socket
with shielded type.
Replace flylead with
double shielded type.
Connect aerial to digital
input on TV first.
Consult dealer
concerning digital
compatible booster
amplifier.
Tilt aerial up slightly.
Place TV in Standby.
Use 'Add New Services'
from the 'Digital Setup'
menu. (Manual Tune -
Digital section).
69
Advertisement
Table of Contents
