Change Oil - DURKOPP ADLER 767 Service Instructions Manual

12.3 Change Oil

48
1 2 4
ATTENTION !
The oil has to be changed after the first 500 operating hours.
Thereafter it has to be changed every two years, independent
of the number of operating hours.
Oil the special sewing machine exclusively with lubricating oil DA-10 or
an equivalent oil with the following specification:
- Viscosity at 40° C :
- Ignition point:
DA-10 can be bought at the sales points of the
DÜRKOPP ADLER AG under the following parts numbers:
250-ml-Container:
1-Litre-Container:
2-Litre-Container:
5-Litre-Container:
Caution: Danger of injury !
Switch off main switch.
Change oil only when sewing machine is switched off.
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
–
Screw off cover of the oil pan.
–
Unscrew locking screw 3 and drain off used oil. Deliver used oil to
an authorized collecting station.
–
Clean oil pan and ventilation tube 4.
–
Clean fluid reservoir 1 and sintered metal filter 2.
–
Screw in locking screw 3 with a new sealing ring 5.
–
Screw on cover of the oil pan with a new gasket.
–
Fill up fresh oil via charging funnel 6 (see operating instructions).
6 3 5
2
10 mm /s
150 °C
9047 000011
9047 000012
9047 000013
9047 000014