Operating The Stitch Adjustments For Machines Equipped With 2Nd Stitch Length As Standard - DURKOPP ADLER 767 Service Instructions Manual

5.4

Operating the stitch adjustments for machines equipped with 2nd stitch length as standard

1
2
3
4
Both stitch lengths are defined by means of the two setting wheels 1
and 2.
–
Set the longer stitch length with the upper setting wheel.
–
Set the shorter stitch length with the lower setting wheel.
–
With the switch 4 you can change over from one stitch length to the
other. When the light emitting diode 3 is shining, the longer stitch
length is active.When the light emitting diode 3 does not shine, the
shorter stitch length is active.
ATTENTION !
The stitch length adjusted at the lower setting wheel must
never be longer than that adjusted at the upper setting wheel.
GB
23