Bobbin Winder - DURKOPP ADLER 767 Service Instructions Manual

11.

Bobbin Winder

Standard checking
The bobbin winder must stop automatically when the bobbin is filled up
to approx. 0.5 mm from its edge.
Caution: Danger of injury !
Switch off main switch.
Adjust bobbin capacity only when sewing machine is switched off.
Correction
Minor alterations of the bobbin capacity:
- Adjust setting screw 1 at the release lever 2.
Reduce bobbin capacity:
Increase bobbin capacity:
1
2
Screw in setting screw 1
Screw out setting screw 1
GB
43