HP Xw6200 - Workstation - 2 GB RAM Technical Reference Manual page 57

4 Before exiting, click File>Save Changes and Exit.
Hood Lock (Smart Cover Lock)
When installed, the hood lock can prevent unauthorized access to the internal components
CAUTION For maximum cover lock security, be sure to establish a setup password. The setup
password prevents unauthorized access to the Computer Setup utility.
LOCKING THE SOLENOID LOCK
To activate and lock the solenoid lock:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart.
2 As soon as the workstation is turned on, press and hold the F10 key until you enter Computer Setup.
Press Enter to bypass the title screen, if necessary.
NOTE If you do not press the F10 key at the appropriate time, you must restart the workstation and
press and hold the F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.
3 Select Security>Smart Cover>Cover Lock>Lock option.
4 Before exiting, select File>Save Changes and Exit.
UNLOCKING THE SOLENOID LOCK
To unlock the solenoid lock:
1 Turn on or restart the workstation. If you are in Windows, click Start>Shut Down>Restart.
As soon as the workstation is turned on, press and hold the F10 key until you enter Computer Setup.
2
Press Enter to bypass the title screen, if necessary.
NOTE If you do not press the F10 key at the appropriate time, you must restart the workstation and
press and hold the F10 key again to access the utility.
If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.
3 Select Security>Smart Cover>Cover Lock>Unlock.
4 Before exiting, select File>Save Changes and Exit.
USING THE FAILSAFE KEY
If you enable the hood lock and cannot enter your password to disable the lock, you will need a FailSafe
Key to open the workstation side access panel. You will need the key in any of the following
circumstances:
DESKTOP MANAGEMENT 57