F Power Cord Set Requirements - HP Xw6200 - Workstation - 2 GB RAM Technical Reference Manual

Appendix F Power Cord Set Requirements
The power cord set (flexible cord or wall plug) received with this product meets the requirements for use in the
country where you purchased the equipment.
If you must obtain a power cord for a different country, you should purchase a power cord that is approved for use
in that country.
The power cord must be rated for the product and for the voltage and current marked on the product's electrical
ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating
2
marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm or 18 AWG, and the
length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of
power cord to use, contact the HP authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed on it or against it.
Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.
177