Fixing Roller Heater - Canon LBP-3260 Service Manual

4) Take out the 4 connectors.
Connectors
Figure 3-4-12
5) Disconnect the heater claw of the hold-
er and remove the holder. Then, gently
pull out the fixing heater from the fixing
upper roller.
Claw
Heater holder

Fixing roller heater

Figure 3-4-13
H. Fixing Upper Roller
1) Remove the fixing unit following steps
1-2 on Page 3-13.
2) Hold up the left and right levers in the
direction of the arrow.
3) Remove the 2 screws.
4) Remove the claw then remove the sepa-
ration upper guide while pulling out the
separation lower guide.
Fixing unit fastening levers
Screws
Claw
Separation lower guide
Separation upper guide
Figure 3-4-14
CHAPTER 3
3 - 19