Canon LBP-3260 Service Manual page 115

4. Rear cover
1) Open the upper cover.
2) Open the pick-up unit door.
3) Remove the 2 screws, unhook the claw,
and then remove the right rear cover.
Screws Claw
Right rear cover
Figure 3-2-10
4) Remove the 6 screws and then the rear
cover.
Screws Rear cover
Figure 3-2-11
5. Delivery cover unit
1) Open the delivery cover unit.
2) Remove the 2 rods that hold the delivery
cover unit to the printer.
3) Lifting up the delivery cover unit slight-
ly, remove the right and then the left
side of the unit.
Delivery cover unit
Rods
Figure 3-2-12
6. Multi-purpose tray
1) Open the multi-purpose tray.
2) Unhook the 2 claws that hold the multi-
purpose tray to the printer and pull out
the tray toward you.
Claws
Multi-purpose tray
Figure 3-2-13
CHAPTER 3
3 - 5