CHAPTER 3
II. EXTERNALS
A. Locations
1: Upper cover unit
3: Face-down tray
5: Right rear cover
7: Pick-up unit door
9: Front cover
11: Face-up tray
13: Left rear cover
Follow the procedures below to remove the cover(s) as required when cleaning, inspecting, or
repairing inside the printer.
The procedures for the covers, which can be removed simply by removing screws without
removing other parts, are omitted.
3 - 2
14
2: Operation panel unit
4: Upper cover
6: Multi-purpose tray
8: Duplexing unit door
10: Delivery cover unit
12: Left lower cover
14: Rear cover
Figure 3-2-1
11
12
13