Table of Contents
Advertisement
IV. MESSAGES TABLE
Message
COLD RESET
Displays when the COLD RESET (Letter or A4)
Power-On sequence is selected.
COLD RESET A4
Displays when Factory Reset - A4
Power-on sequence is selected.
COLD RESET LTR
Displays when Factory Reset - LTR
Power-on sequence is selected.
CONTEXT SAVE
Context Saving mechanism modified by OS.
ADJUSTED
Displayed when printer powered on with con-
text saving enabled, but due to manual recon-
figuration, there is not enough memory to
support it.
CONTEXT SAVE
Context saving mechanism modified by USER.
CHANGE
Displayed when going online after modifying
context saving.
WARMING UP...
Printer is warming up.
I/O INITIALIZING
This message displays when one of the net-
work boads is being initialized.
READY
Printer is ready to receive data and print.
PAUSED
Printer is OFFLINE.
PRINTING...
Usually displayed when printing an item from
the TEST MENU, or when attempting to go
Offline while the printer is busy.
KEY NOT VALID
Displays when a key is pressed that is not
enabled at this time.
RESET TO SAVE
RESET verification prompt. This message will
appear momentarily and then PAUSED. When
a menu item was changed before the printer
releases the port on which the last job was
processed, such as in the middle of a job, or
before the port timed out.
effect for the following menu items:
Parallel menu
Config menu
paper type menu
feeder menu
Meaning
RESET TO SAVE doesn't display or take
-bidirectional=on/off
-density
-pwrsav
-upper
-lower
-deck
-mpt
-mptsize
APPENDIX
Action
No action required although the
printer will be reset to its factory
defaults and any unique settings
will have to be reset.
No action required.
No action required.
Press Continue key to continue.
Press Continue and printer will
reboot to enable its new state.
Wait until the printer has warmed
up and displays "READY".
No action required.
No action required.
Press ONLINE.
No action required
Press the correct key to complete
the current function.
Two options are available:
1.
Press the reset key to enter
the RESET menu and save
the information immediately.
This will terminate the cur-
rent job, deleting temporary
fonts, macros and buffered
data.
2.
Press ONLINE and the cur-
rent job will resume where it
left off. The menu items
changed will not take effect
until the next end of job.
A - 11
Advertisement
Table of Contents
Troubleshooting
