Table of Contents
Advertisement
Configuring the LDMs
Configuring the LDMs
Address Switches - SW1 and SW2
It is critical to the operation of the LDMs that the Address Switches be set
correctly.
To set the LDM-32F's address to '01', position the arrow on SW2 (tens) so it
points to 0 and position the arrow on SW1 (ones) so it points to 1.
Function DIP Switch - SW3
These switches are used to determine how the LDM-32F operates. The
following illustration provides details on DIP switch placement in the On and
Off position:
LDM-32F PN 50055:C 03/20/01
Figure 17 Address Switches SW1 & SW2
Figure 18 Function DIP Switch
Side View of Switch
Shown in the OFF
Position
2. Installation
25
Advertisement
Table of Contents
