Table of Contents
Advertisement
2. Installation
Slip the bottom edge of the module or expander board into the slot on the chassis
and move the module toward the standoffs. Secure the board to the standoffs
with the screws provided. Repeat for installation of additional modules or
expanders.
Connect an expander ribbon cable (P/N 75120) from the LDM-32F connector
J2 to J3 of the first LDM-E32F expander module. If multiple LDM-E32F
modules are to be used, connect additional cables from J2 to J3 as shown below.
One LDM-32F may support a maximum of three LDM-E32F modules.
18
Figure 5 Installing LDM Modules in CHS-4L
Expander Ribbon Cables
LDM-32F
LDM-E32F
Figure 6 LDMs Mounted in UL Listed Cabinet
LDM-E32F
LDM-E32F
LDM-32F PN 50055:C 03/20/01
CHS-4L Chassis
Advertisement
Table of Contents
