Table of Contents
Advertisement
Related Documentation
Each LDM-CBL48 cable kit includes:
• (4) P/N 75147, 48" cable consisting of 8 stranded, multicolored
conductors. Cables connect to J5, J6, J7 and J8.
• (1) P/N 75150, 48" cable consisting of 10 stranded, multicolored
conductors. Connects to J1, optional control switches.
• (1) P/N 75148, 48" cable consisting of 2 stranded, single color
conductors. Connects to J1, Lamp Test Switch
• (1) P/N 75149, 48" cable consisting of 3 stranded, multicolored
conductors. Connects to J9 or J11, Lamp Power.
Key-lock Control Switch Security
A UL listed key-lock switch wired to J4 on the LDM-32F should be used to
provide access security for all control switches wired to that set of LDM
modules.
Note: Control switches will not function when the key-lock switch is in its closed position.
Related Documentation
Further details about products referenced in this document can be found in the
manuals for the particular fire alarm control panel and components.
Product
MS-9200 Fire Alarm Control Panel Instruction Manual
MS-9600 Fire Alarm Control Panel Instruction Manual
Sensiscan 2000 Fire Alarm Control Panel Instruction Manual
CAB-3F Series Cabinets Installation Document
LDM-32F PN 50055:C 03/20/01
Key Switch
Figure 3 Key-lock Switch Wiring Diagram
.
J4
2
1
LDM-32F
Part
Number
51003
51335
15017
15391
1. Introduction
15
Advertisement
Table of Contents
