Fire-Lite LDM-32F Instruction Manual page 39

Lamp/LED Driver Operation
The figure below is an example of the connections used when setting the LDM
module for Alarm/Trouble mode.
J5 J6
The figure below illustrates pin usage of output connectors for system functions
in Alarm/Trouble mode.
System Status Indicators
Supervisory (Yellow)
Signals Silenced (Yellow)
System Trouble (Yellow)
System Alarm (Red)
Figure 26 System Functions to Output Connectors - 1
The figure below illustrates pin usage of output connectors for system functions
in alarm/trouble mode with 8-Point shift selected.
System Status Indicators
Supervisory (Yellow)
Signals Silenced (Yellow)
System Trouble (Yellow)
System Alarm (Red)
Figure 27 System Functions to Output Connectors - 2
LDM-32F PN 50055:C 03/20/01
J7
Figure 25 Connections for Alarm/Trouble
Not Used
Not
Used
J5
Not Used
Not
Used
J7
Appendix A: Sensiscan 2000
Alarm - First 4 Zones or Points
Trouble - First 4 Zones or Points
Alarm - Second 4 Zones or Points
Trouble - Second 4 Zones or Points
Alarm - Third 4 Zones or Points
Trouble - Third 4 Zones or Points
Alarm - Fourth 4 Zones or Points
Trouble - Fourth 4 Zones or Points
J8
J6
J8
NAC #1 ON (Green)
NAC #2 ON (Green)
Municipal Tie ON (Red)
Alarm Relay ON (Red)
NAC #1 Trbl (Yellow)
NAC #2 Trbl (Yellow)
Municipal Tie Trbl (Yellow)
Alarm Relay Trbl (Yellow)
LCM32F-J5J6.cdr
NAC #1 ON (Green)
NAC #2 ON (Green)
Municipal Tie ON (Red)
Alarm Relay ON (Red)
NAC #1 Trbl (Yellow)
NAC #2 Trbl (Yellow)
Municipal Tie Trbl (Yellow)
Alarm Relay Trbl (Yellow)
LCM32F-J7J8.cdr
39