Non-Bus Master Adapter And Diagnostic Program Names; Starting The Group 3 Test - 3Com EISA 10/100BASE-T User Manual

Table 5-1 Non-Bus Master Adapter and Diagnostic Program Names
Diagnostic Program Name Adapter
3C503
3C505
3C507
3C5X9CFG
3C523
3C523TP
3C527
3C59XCFG.EXE

Starting the Group 3 Test

To run the Group 3 test on a Fast EtherLink EISA adapter,
follow these steps:
1 Start the Configuration and Diagnostic Program.
This program must be on the computer containing the
adapter you want to test.
2 Select Test Setup from the Test menu.
3 Select Group 3 from the Group Select box.
4 Enable the Group 3 test by selecting the Enable Group button.
5 Select OK and press [Enter].
6 Go to the Run Tests dialog box and select Start to start the
tests.
7 After the test is completed:
a End the program on the echo server.
b Exit the diagnostic program.
Starting the Diagnostic Program
â
EtherLink II or II TP
EtherLink II/16 or II/16 TP
â
EtherLink Plus
EtherLink 16 or EtherLink 16 TP
EtherLink III family
EtherLink/MC
EtherLink/MC TP
EtherLink/MC 32
EtherLink III EISA, EtherLink III PCI,
Fast EtherLink PCI, and Fast EtherLink EISA
5-7