Table of Contents
Advertisement
EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.X.X
ESC=Cancel
3Com's auto installation software (AutoLink) automatically configures your
adapter and workstation for use as a NetWare client. To use AutoLink:
* Have only one 3Com EISA Bus Master adapter installed
* Use NetWare v2.X, v3.1X, or v4.X as your network operating system
* Have DOS on the client being installed
AutoLink edits your AUTOEXEC.BAT and CONFIG.SYS files and saves the old
versions. Select General Information/Release Notes in the main menu for
information on AutoLink server support. To manually set up your adapter
or for information/drivers for other NOSs, use the options under Standard
Installation and Configuration in the main menu.
This option will install a complete DOS ODI client.
(C) Copyright 1995, 3Com Corporation. All Rights Reserved
[ENTER]=Continue
[ESC]=Exit Program
Figure 3-2 Auto Installation Screen
EtherDisk-3C59X Fast EtherLink/EtherLink III Bus Master Adapter Family v.X.X
ESC=Cancel
Auto Installation with Configuration (AutoLink)
NetWare DOS ODI Client
Standard Installation and Configuration
Network Drivers ...
Configuration/Diagnostic/Troubleshooting ...
General Information/Release Notes
Program & information for configuring/testing/troubleshooting adapters
(C) Copyright 1995, 3Com Corporation. All Rights Reserved
[ENTER]=Execute Function
-¯
[
]=Scroll
[F1]=Help [ESC]=<Cancel>
Figure 3-3 Main Menu
Software Option Settings
M A I N
M E N U
3-7
F1=Help
Advertisement
Table of Contents
