System Board
Description
System board for use in models with 65W processors (includes thermal material)
System board for use in models with 95W processors (includes thermal material)
System board for use in Brazil (includes thermal material)
The system board is secured to the computer with six screws.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules
●
Expansion cards
●
Heat sink
●
Processor
4.
Remove the fan from the chassis
5.
Rotate the drive cage to its upright position.
6.
Rotate the power supply to its full upright position.
7.
Disconnect all data and power cables from the system board.
8.
Disconnect the balance of the cables from the system board.
(Access Panel on page
(seeMemory on page
(Expansion Card on page
(Fan Sink on page
131)
(Processor on page
133)
(Fan Assembly on page
(Preparation for Disassembly on page
102).
105)
110)
129).
Spare part number
656598-001
660281-001
665223-001
101).
System Board 137