Routine Care, And Disassembly Preparation; Electrostatic Discharge Information; Generating Static - HP Elite 7500 Microtower Maintenance And Service Manual

6 Routine Care, and Disassembly
Preparation
This chapter provides general service information for the computer. Adherence to the procedures and
precautions described in this chapter is essential for proper service.
CAUTION:
the system board. You must disconnect the power cord from the power source before opening the
computer to prevent system board or component damage.

Electrostatic Discharge Information

A sudden discharge of static electricity from your finger or other conductor can destroy static-sensitive
devices or microcircuitry. Often the spark is neither felt nor heard, but damage occurs. An electronic
device exposed to electrostatic discharge (ESD) may not appear to be affected at all and can work
perfectly throughout a normal cycle. The device may function normally for a while, but it has been
degraded in the internal layers, reducing its life expectancy.
Networks built into many integrated circuits provide some protection, but in many cases, the
discharge contains enough power to alter device parameters or melt silicon junctions.

Generating Static

The following table shows that:
●
Different activities generate different amounts of static electricity.
●
Static electricity increases as humidity decreases.
Event
Walking across carpet
Walking across vinyl floor
Motions of bench worker
Removing DIPs* from plastic tube
38 Chapter 6 Routine Care, and Disassembly Preparation
When the computer is plugged into an AC power source, voltage is always applied to
Relative Humidity
55% 40%
7,500 V 15,000 V
3,000 V 5,000 V
400 V 800 V
400 V 700 V
10%
35,000 V
12,000 V
6,000 V
2,000 V