Fan Sink Assembly - HP Elite 7500 Microtower Maintenance And Service Manual
Maintenance & service guide hp elite 7300 & 7500 microtower, hp pro 3300 & 3305 microtower hp pro 3300 small form factor
Hide thumbs
Also See for Elite 7500 Microtower:
- User manual (74 pages) ,
- Manual (4 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
Fan Sink Assembly
Description
Fan sink for use in models with Intel processors
Fan sink for use in models with AMD processors
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lay the computer on its side with the rear facing toward you.
4.
Loosen the four captive Torx screws that secure the fan sink to the system board.
5.
Disconnect the fan sink cable from the white system board connector labeled CPU FAN1.
Figure 7-43
88
Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
(Access Panel on page
Removing the fan sink (fan sink appearance may vary)
(Preparation for Disassembly on page
47).
Spare part number
657402-001
656985-001
46).
Hide quick links:
Advertisement
Table of Contents
