HP Elite 7500 Microtower Maintenance And Service Manual page 20

Maintenance & service guide hp elite 7300 & 7500 microtower, hp pro 3300 & 3305 microtower hp pro 3300 small form factor
Hide thumbs Also See for Elite 7500 Microtower:
Table of Contents

Advertisement

Table 3-3
Computer Setup—Storage (continued)
DPS Self-Test
Boot Order
10
Chapter 3 Computer Setup (F10) Utility
Allows you to execute self-tests on ATA hard drives capable of performing the Drive Protection
System (DPS) self-tests.
NOTE:
This selection will only appear when at least one drive capable of performing the DPS
self-tests is attached to the system.
Allows you to:
Specify the order in which EFI boot sources (such as a internal hard drive, USB hard drive,
USB optical drive, or internal optical drive) are checked for a bootable operating system
image. Each device on the list may be individually excluded from or included for
consideration as a bootable operating system source.
EFI boot sources always have precedence over legacy boot sources.
Specify the order in which legacy boot sources (such as a network interface card, internal
hard drive, USB optical drive, or internal optical drive) are checked for a bootable operating
system image. Each device on the list may be individually excluded from or included for
consideration as a bootable operating system source.
Specify the order of attached hard drives. The first hard drive in the order will have priority in
the boot sequence and will be recognized as drive C (if any devices are attached).
NOTE:
You can use
F5
to disable individual boot items, as well as disable EFI boot and/or
legacy boot.
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Shortcut to Temporarily Override Boot Order
To boot one time from a device other than the default device specified in Boot Order, restart the
computer and press
Esc
(to access the boot menu) and then
the boot menu) when the monitor light turns green. After POST is completed, a list of bootable
devices is displayed. Use the arrow keys to select the preferred bootable device and press Enter.
The computer then boots from the selected non-default device for this one time.
F9
(Boot Order), or only
F9
(skipping

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents