Memory; Ddr3-Sdram Dimms - HP Elite 7500 Microtower Maintenance And Service Manual

Memory

NOTE: HP Elite 7500 models use PC3-12800 memory. HP Elite 7300 and HP Pro 3300/3305
models use PC3-10800 memory.
Description
PC3-10600, 1333-MHz for use in only 7300 and 3300 models
4-GB
2-GB
1-GB
PC3-12800, 1666-MHz for use in only 7500 models
4-GB
2-GB
The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-
SDRAM) dual inline memory modules (DIMMs).

DDR3-SDRAM DIMMs

The memory sockets on the system board are as follows:
– Four DIMM slots for HP Pro 3305, HP Elite 7300, and HP Elite 7500
– Two DIMM slots for HP Pro 3300
These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum
memory support, you can populate the system board with up to:
– 16 GB for HP Pro 3305
– 8 GB for HP Pro 3300, HP Elite 7300, and HP Elite 7500
HP Pro 3300, HP Elite 7300 Memory
For proper system operation, the DDR3-SDRAM DIMMs must be:
●
industry-standard 240-pin
●
unbuffered non-ECC PC3-10600 DDR3-1333 MHz-compliant
●
1.5 volt DDR3-SDRAM DIMMs
The DDR3-SDRAM DIMMs must also:
●
support CAS latency 9 DDR3 1333 MHz (9-9-9 timing)
●
contain the mandatory JEDEC SPD information
Spare part number
585157-001
635803-001
635802-001
671613-001
671612-001
Memory 51