Problems After Initial Startup - HP DL320 - ProLiant - G3 Setup And Installation Manual

Problems After Initial Startup

After the server has passed POST, errors may still be encountered, such as an
inability to load the operating system. Use Table D-4 to troubleshoot server
installation problems that occur after the initial startup.
For updated information on supported operating systems, refer to Appendix F,
"Server Specifications," or go to
www.hp.com
NOTE: If the server is rebooting repeatedly, be sure that the system is not restarting due to an
Automatic Server Recovery (ASR) power up caused by another problem. Review Insight
Manager for notification of this event. Refer to the Servers Troubleshooting Guide for more
information.
Refer to the Servers Troubleshooting Guide for the following:
•
Information that must be collected when diagnosing software problems and to
provide when contacting support
•
Instructions on how to upgrade the operating system and its drivers
•
Information on available recovery options and advice on minimizing downtime
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
Troubleshooting
D-9