Optimum Environment; Space And Airflow Requirements - HP DL320 - ProLiant - G3 Setup And Installation Manual

Planning the Server Installation
5. Use the rack template to identify the proper location for server installation. Refer
to "Measuring with the Template," in Chapter 4, "Server Installation."
6. Install the fixed rack rails. Refer to "Installing the Fixed Rack Rails," in
Chapter 4, "Server Installation."
7. Install the fixed cable tray for managing cables on the server rear panel.
These cables include keyboard, mouse, monitor, network, and power cables.
Refer to "Attaching the Fixed Cable Tray," in Chapter 4, "Server Installation."
8. Mount the server in the rack. Refer to "Inserting the Server into the Rack," in
Chapter 4, "Server Installation."
9. Connect the power cord and peripheral devices. Refer to "Connecting the
Peripheral Device Cables and the Power Cord," in Chapter 4, "Server
Installation."
10. Secure the power cord and peripheral device cables in the fixed cable tray. Refer
to "Securing the Cables in the Fixed Cable Tray," in Chapter 4, "Server
Installation."

Optimum Environment

When installing these servers in a rack, select a location that meets the environmental
standards described in the following paragraphs.

Space and Airflow Requirements

To allow for servicing and adequate airflow, observe the following spatial
requirements when deciding where to install an HP, Compaq, Telco, or third-party
rack:
•
Leave a minimum clearance of 63.5 cm (25 inches) in front of the rack.
•
Leave a minimum clearance of 76.2 cm (30 inches) behind the rack.
•
Leave a minimum clearance of 121.9 cm (48 inches) from the back of the rack to
the rear of another rack or row of racks.
2-2 HP ProLiant DL320 Generation 2 Server Setup and Installation Guide