HP DL320 - ProLiant - G3 Setup And Installation Manual page 89

RAID Configuration and Management
2. If an unexpected message is received, such as
Configuration Mismatch
ATA cables, and power cables.
3. If the
Configuration Mismatch
that is because the new drives had been used before and the configuration on the
drives was not cleared. If this message is displayed, press the F8 key to go to the
setup and create the array configuration as needed.
6-10
, switch off the server and check all connections,
message is received after adding new drives,
HP ProLiant DL320 Generation 2 Server Setup and Installation Guide
or
Drives Missing