The HP ProLiant DL320 Security Server is factory prepared to Quick setup poster protect your networks and allow secure Internet access. Use this quick setup poster to help set up the ProLiant DL320 Security Server. HP highly recommends following the instructions in this quick setup poster to the end.
ProLiant DL320 Security Server, and plug the other end into your perimeter network hub or switch. Connect a monitor to the VGA port of the ProLiant DL320 Security Server. Connect a keyboard and a mouse to the keyboard and mouse ports.
Page 3
IP address, and enter the IP addresses to use. Otherwise, select Obtain an IP address automatically. To avoid configuring the external network interface, select the Skip this step checkbox. HP recommends configuring this interface at this time because the firewall is already enforcing a strict security policy.
When logging on to the ProLiant DL320 Security Server for the Click Next. first time, read the information displayed on the Getting Started At the Workgroup or Computer Domain page, either select page. This information guides you through the basic Domain and enter the appropriate domain name, or select configuration steps.