Canon FACSIMILE BASIC 2000 Service Manual page 255

Bit No.
21,22, Minimum transmission time:
23
24 Extension field: (1) = FIF is extended by 8 bits after this bit.
25 = "0"
26 Uncompressed mode:
27 ECM: (0) = Not provided, (1) = Provided
28 = "0"
29 = "0"
30 = "0"
31 T.6 coding capability: (0) = Not provided, (1) = Provided
32 Extension field: (1) = FIF is extended by 8 bits after this bit.
33 Field disabling capability: (0) = Not provided, (1) = Provided
34 Multiple selection polling capability: (0) = Not provided, (1) = Provided
35 PSA capability: (0) = Not provided, (1) = Provided
36 T.43 coding: (0) = Not provided, (1) = Provided
37 Plain interleaving: (0) = Not provided, (1) = Provided
38 Pending
39 Pending
40 Extension field: (1) = FIF is extended by 8 bits after this bit.
41 R8 dots/mm 15.4 lines/mm (super-fine):
42 300 300 dpi
43 R16 dots/mm 15.4 lines/mm
and/or 400 400 dpi : (0) = Not provided, (1) = Provided
44 Resolution in inch units is desirable.
45 Resolution in mm units is desirable.
46 Min. scanline time capability at high resolution
"0" : T15.4 = T7.7
"1" : T15.4 = 1/1 T7.7
47 Selection polling capability: (0) = Not provided, (1) = Provided
G3 FACSIMILE COMMUNICATIONS
Table 5-15 FIF of DIS, DTC
Meaning/Function
(000) = 20 ms in standard, 20 ms in fine
(001) = 40 ms in standard, 40 ms in fine
(010) = 10 ms in standard, 10 ms in fine
(100) = 5 ms in standard, 5 ms in fine
(011) = 10 ms in standard, 5 ms in fine
(110) = 20 ms in standard, 10 ms in fine
(101) = 40 ms in standard, 20 ms in fine
(111) = 0 ms in standard, 0 ms in fine
(0) = FIF is up to this bit.
(0) = Not provided,
(1) = Provided, (0) on Canon machines
(0) = FIF is up to this bit.
(0) = FIF is up to this bit.
(0) = Not provided, (1) = Provided
1
2
3
4
5
6
ït
çi
5–113