Canon FACSIMILE BASIC 2000 Service Manual page 239

6.3.6 Post-message commands
The transmitter notifies the other party that transmission has ended after
the image signal has finished being transmitted.
The signal to be transmitted sometimes changes when the next document
is prepared or when the transmission mode is to be changed. In this exam-
ple, EOP is transmitted as the image data is only one page. MPS and EOM
are also transmitted.
Calling Side (transmitter)
EOP
This signal shows that transmission of images of one page is complete
and that the next document is not prepared.
Training
Message
RTC
Preamble
EOP
Preamble
Fig. 5-71 Post-message Commands
Transmission Reception
G3 FACSIMILE COMMUNICATIONS
Called Side (receiver)
MCF
Binary signal
1
2
3
4
5
6
ït
çi
5–97