Connecting a LAN Cable
1
2
2
2-32
Connecting to a Computer
Connect the LAN cable to the LAN connector of the network
board.
Connect the other end of the LAN cable to the hub.
NOTE
If this printer is connected to a network, the following tasks are required.
- Specifying the network settings for the computer (See the instruction manual for
the computer)
- Performing the installation of and the network settings for the printer to use it on a
network (See Network Guide)
- Configure the print server. (See "Printing from a Network Computer by Sharing
the Printer on a Network," on p. 4-35)