Power Supply Requirements; Installation Requirements - Canon LBP3310 User Manual

Power Supply Requirements

The maximum power consumption of this printer is 950 W or less for the 220 to 240
V model (and 890 W or less for 110 to 127 V model).
Make sure that the power supply is safe and its voltage is stable.
Use power supplies rated for voltages within the following ranges.
110 to 127 V (± 10 %) 50/60 Hz (± 2 Hz)
•
220 to 240 V (± 10 %) 50/60 Hz (± 2 Hz)
•
IMPORTANT
2
One AC power outlet should be reserved exclusively for the printer. Any other sockets of
•
this AC power outlet should not be used.
Do not plug the power plug into the auxiliary outlet on a computer.
•
Do not use the same AC power outlet for both the printer and for machinery which
•
consumes a large amount of electricity or generates electrical noise (such as a copy
machine, air conditioner, and shredder).

Installation Requirements

Install the printer in the following locations.
A location where sufficient space can be ensured
•
A well-ventilated location
•
A flat, even surface
•
A sturdy platform that can easily support the weight of the printer and optional
•
accessories
WARNING
Do not install the printer near alcohol, paint thinner, or other flammable
substances. If flammable substances come into contact with electrical parts
inside the printer, this may result in a fire or electrical shock.
CAUTION
Do not install the printer in the following locations, as this may result in a fire or
•
electrical shock.
- A location exposed to high humidity or excess dust
- A location exposed to smoke and steam, such as in cookeries or near or
- A location exposed to rain or snow
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
Do not install the printer on unstable locations, such as unsteady platforms,
•
inclined floors, or in locations subject to excessive vibrations, as this may
cause the printer to fall or tip over, resulting in personal injury.
2-4 Installation Site
humidifiers