Canon LBP3310 User Manual page 419

16
17
9
18
19
20
21
9-30 Network Board
Remove the network board, then reset the DIP switch 1 to
OFF.
Set the DIP switches with a small tool such as the tip of a ball-point pen.
E R R
IMPORTANT
Do not touch the network board parts, printed circuits, or connectors with your
•
hands.
Do not drop screws, paper clips, staples, or other metal objects inside the printer. If
•
any of these objects should drop inside the printer, do not plug the power plug into
the AC power outlet and contact your local authorized Canon dealer.
When setting the DIP switches, be careful not to damage the main board with a
•
small tool such as the tip of a ball-point pen. Do not use a sharp object such as a
mechanical pencil.
Install the network board.
Connect the LAN cable to the network board.
Connect the power cord to the printer.
Plug the power plug into the AC power outlet.
Connect the USB cable to the printer as needed.
DIP switch 1
OFF
1 0 0
L N K
1 2 3 4
OFF