Canon LBP3310 User Manual page 133

4
5
6
4
4-6 Installing the Printer Driver
Turn the computer on and start up Windows.
Log on as a user with administrator rights.
IMPORTANT
If a Wizard or dialog box appears through the Plug and Play automatic setup, click
•
[Cancel], turn the printer OFF, and then install the printer driver using this
procedure.
If you are not sure about the permissions, ask your computer administrator.
•
Insert the supplied "LBP3310 User Software" CD-ROM into
the CD-ROM drive.
If the CD-ROM is already in the drive, eject the disk and re-insert it into the drive.
IMPORTANT
If you are using Windows Vista and the [AutoPlay] dialog box appears, click [Run
•
AUTORUN.EXE].
If CD-ROM Setup does not appear, display it using the following procedures. (The
•
CD-ROM drive name is indicated as "D:" in this manual. The CD-ROM drive name
may differ depending on the computer you are using.)
- If you are using an operating system other than Windows Vista, select [Run] from
the [Start] menu, enter "D:\English\MInst.exe", and then click [OK].
- If you are using Windows Vista, enter "D:\English\MInst.exe" in [Start Search]
under the [Start] menu, and then press the [ENTER] key on your keyboard.
NOTE
If you are using Windows Vista and the [User Account Control] dialog box appears,
click [Allow].