Message List - Canon Satera LBP-3700 User Manual

Message List

When printing becomes disabled (Error status) during printing for some reason, the
printer beeps, and the
that indicates the description of the error. When some remedy needs to be applied
to the printer (Waning status), Waning message appears on the display. In this
case, perform the following procedures according to the message.
NOTE
•
When multiple warnings are occurring at the same time, the Waning messages appear
by rotation.
•
When the printer is in Error status and Warning status at the same time, the Waning
message does not appear.
•
If <
•
When a message with the
continue printing by pressing [
missing or it may not be printed properly. If you want to cancel the process, perform the
soft-reset to eliminate the cause, then press [
errors that the messages with this mark indicate are automatically skipped by specifying
<
110
indicator illuminates displaying an error message
> in the
does not disappear even when the printer is in a Warning status.
> for <
Message
menu is set to < >, the message with
mark appears, you can evade the error and
]. In this case, part of the print data may be
> in the menu.
Cause and Remedy
Cause: The temperature of the fixing unit
exceeded a certain degree limit
by a continuous job (especially by
printing paper of a narrow width).
Remedy: Wait for a while. The printer
automatically cools down the
fixing unit. The printer resumes
the paused job after cooling down
the fixing unit.
Cause: Paper of the size specified in the
application is not loaded in the
paper source (In all the paper
sources when <
for the paper feed mode; In the
specified paper source when
fixed)
Remedy: Refill or load paper.
] to perform printing again. The
> is selected