Table of Contents
Advertisement
The control panel indicators and display will illuminate, and the printer will perform
a self-diagnostic test to check the status of the main unit and optional
accessories.
If no abnormality is found during the self-diagnostic test, the
indicators and the indicator for selected paper source will illuminate, and <
display, indicating that the printer is ready to print.
The following information appears on the display:
Pr intable and not
proc es sing pr int data
Turning the Printer OFF
Follow the instruction below to turn the printer OFF.
IMPORTANT
•
If the printer is used on a network, make sure that other computers are not sending print
data into the printer before turning the printer OFF.
•
If you turn the printer OFF when the
printer memory will be erased. If you have necessary print data remaining in the printer,
wait until it is output or press [
turning the printer OFF.
•
Do not turn the printer OFF when the printer is in the following status:
- During printing
- While running a self-diagnostic test immediately after turning the printer ON
- When the message that NVRAM is initializing or writing data is displayed
>, <
>, <
], then select <
>, or <
S i ze of paper i n t he
curr entl y sel ec ted
paper sourc e
indicator is on, all print data remaining in the
> to output the data before
and
> appears on the
3
Advertisement
Table of Contents
