Reassembly Of The Film Path Assy - Brother SC-2000 Service Manual

2.2

Reassembly of the Film Path Assy

While bending two parts A of the film path in the directions of the arrows, insert
them into the holes in the magazine lift sub assy, as shown in Fig. 3.50.
Magazine lift sub assy
Set the two magazine springs on two hooks B of the film path assy, and then two
hooks C of the magazine lift sub assy, as shown in Fig. 3.51.
Hooks C
Parts A
Fig. 3.50
Magazine springs
Fig. 3.51
III - 37
Film path
Magazine lift sub assy
Film path assy
Hooks B