3.
MOTOR
(1) Main motor
This motor feeds a draft sheet or an ID label from the platen to the eject
opening. It is a 42 bipolar motor at a drive voltage of 25V.
(2) Paper feed motor
This motor feeds a draft sheet or an ID label label from the manual insertion
opening or the magazine tray to the platen. It is a 25 unipolar motor at a drive
voltage of 25V.
4.
THERMAL HEAD
It is a thin film thermal printer head with a built-in driver circuit, consisting of 960
heating elements. These heating elements perform printing when they are
energized (drive voltage: 19V).
5.
LCD
It is a LCD that displays up to 15 columns
1 line and 14 guidances.
II - 2