Brother SC-2000 Service Manual page 40

Remove the four retaining rings to remove the presser plate hinge shaft from the
presser frame sub assy, as shown in Fig. 3.32.
Presser plate hinge shaft
While bending two claws A of the presser plate cover and the presser plate in the
directions of the arrows, remove the presser plate cover, as shown in Fig. 3.33.
A
Presser plate
Retaining ring
Fig. 3.32
Fig. 3.33
III - 22
Presser plate
Retaining ring
Retaining rings
Presser frame sub assy
Presser plate cover
A