Disassembly Of The Micro Switches - Brother SC-2000 Service Manual

1.11

Disassembly of the Micro Switches

Remove the screw to remove micro switch assy A for cassette cover open/close
detection from the main chassis, as shown in Fig. 3.26.
Remove the screw to remove micro switch assy B for xenon reset from the main
chassis.
Slide and pull out the xenon lock claw in the directions of arrows, as shown in Fig.
3.27.
Main chassis
Xenon lock claw
Micro switch assy A
Screw
Main chassis
Fig. 3.26
Fig. 3.27
III - 18
Screw
Micro switch assy B