Using Configuration Mode - IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual

Figure 8. Information mode window
154
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
Click
mode to Configuration mode.
2. Continue with one of the following:
•

"Using Configuration mode".

• "Using Information mode" on page 162.
Using Configuration mode
You can use Configuration mode to create up to eight independent disk arrays for
each ServeRAID controller. Configuration mode provides two configuration options:
Express configuration and Custom configuration (see Figure 7 on page 153). You can
also use Custom configuration to create spanned arrays and configure the logical
drive to RAID level-x0.
on the tool bar to switch from Information