Table of Contents
Advertisement
Error Code/Symptom
1xxx (flash checksum error)
2xxx (code DRAM error)
2601 to 260B (POST detected error with ServeRAID
subsystem)
2610 (POST detected error with ServeRAID
controller hardware)
2620 (POST detected ServeRAID configuration or
hard disk error)
3xxx (NVRAM error)
4xxx (timer/cache memory controller error)
5xxx (cache memory controller error)
6xxx (cache DRAM error)
7xxx (host/local PCI bus interface error)
8xxx (SCSI I/O port error)
9xxx (SCSI termination error)
Axxx (SCSI I/O port error)
1.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Reseat Cache Memory SIMM
2.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
3.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Install download jumpers, flash latest level BIOS and
firmware for adapter. Remove jumpers.
2.
ServeRAID 3HB Adapter/Controller
1.
Refer to "ServeRAID POST (ISPR) error procedures" on
page 232.
2.
SCSI cable
3.
SCSI backplane
4.
Hard drive
5.
ServeRAID 3HB Adapter/Controller
1.
Refer to "ServeRAID POST (ISPR) error procedures" on
page 232.
Action
Symptom-to-FRU index
235
Advertisement
Table of Contents
Troubleshooting
