Table of Contents
Advertisement
When you select the Advanced Functions from the Main Menu, the following choices
appear on the screen.
Attention: Be careful when making selections from this menu. If you change the
configuration, you might lose data.
•
Restore to Factory Default Settings is used to reset the configuration. When you
reset the configuration, you will not have access to any data stored on the logical
drives attached to the selected ServeRAID controller.
This choice deletes the existing configuration information, sets all functional
physical drives attached to the controller to the ready state, and deletes all logical
drives defined for the controller.
•
Copy the Configuration from Drives to Controller reads the most common
configuration from the drives in the server and copies it to the ServeRAID
controller.
•
Configure BIOS Settings is used to modify the BIOS settings, such as the
Bootable CD-ROM setting, for the ServeRAID controller (not supported in
ServeRAID family of products).
•
View Controller and PCI Information shows the ServeRAID controller hardware
and PCI register information.
•
Exit is used to exit from the Mini-Configuration program.
Installing and configuring ServeRAID controllers
167
Advertisement
Table of Contents
Troubleshooting
