Movement Of Ccd Unit To The Transport Position - Brother MFC6800 Service Manual

5.3.2A Movement of CCD Unit to the Transport Position
Function
This procedure moves the CCD unit to the transport position of the right end of its travel. After
completing repairs and operation checks on the machine, you need to carry out this procedure
immediately before packing and transporting the machine.
NOTE: If an end user needs to transport his/her machine to the dealer or service station for repair,
then you should instruct him/her to carry out this procedure if possible before packing and
transporting the machine. (For the user-access to the maintenance mode, refer to page 5-3.)
Operating Procedure
(1) Press the 0 and 6 keys in this order in the initial stage of the maintenance mode.
The CCD unit will move to the right end of its travel, during which the "MAINTENANCE 0"
will appear on the LCD.
When the CCD unit reaches the transport position, the "SCAN LOCKED" will appear on the
LCD.
(2) Press the Stop key to make the machine return to the initial stage of the maintenance mode.
5 -6 -1