Main Cover - Brother MFC5100C Service Manual

4.1.15 Main Cover

(1) Turn the machine to the normal position.
(2) Remove the three screws from the main cover. Also remove screw "c" if not removed.
(3) Press the cover retainers R inwards with the tip of a flat screwdriver to release the rear hooks
provided on the inside of the main cover.
(4) Lift up the main cover.
CAUTION: After removing the main cover, do not turn the machine upside down. The main
chassis may be warped or distorted so that the print quality could deteriorate.
4 -4 3