Brother MFC5100C Service Manual page 71

(3) Release the CCD drive belt from boss "a."
(4) At the left front end of the CCD drive belt, unhook the belt spring from boss "b."
NOTE: Do not remove the belt spring or belt clip from the CCD drive belt.
(5) As illustrated below, move the CCD unit to the right, lift up its front end and turn the CCD
unit upright. The CCD drive belt will slip off the CCD idle pulley, drive gear, and belt stopper
on the underside of the CCD unit.
NOTE: Once removed, the belt stopper will become unusable and new part will have to be
put back in.
4 -3 0