Brother MFC5100C Service Manual page 174

EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
n Operating Procedure
(1) Press the Menu, *, 2, 8, 6, and 4 keys in this order to make the facsimile equipment enter the
maintenance mode.
The equipment beeps for approx. one second and displays "
LCD.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., B001 in the case of MFC5100C U.S.A. versions) appears.
(3) Enter the desired customizing code (e.g., 2002 in the case of MFC5100C Canadian version).
NOTE: To enter letters "A" through "F," press the 1 through 6 keys while holding down the #
key, respectively.
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the equipment will malfunction.
(4) Press the Black Fax Start key.
The equipment saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop key or no keys are pressed for one minute in the above procedure, the
equipment stops the procedure and returns to the initial stage of the maintenance mode.
Within 2 seconds
" on the