Brother MFC5100C Service Manual page 206

Selector
No.
1
| Not used.
6
Impedance switching control in
7
pulse dialing
Prompt beep when the memory
8 area for the activity report
becomes full
NOTE: Selectors 7 and 8 are applicable only to the European versions.
Selector 8: Prompt beep for activity report
This selector determines whether or not the equipment will beep if the memory area for the activity
report becomes full, for prompting you to print out the report. (Printing it out will clear the
memory area.)
Selector
No.
1
| Not used.
8
WSW29
(Function setting 7)
Function
Function
Setting and Specifications
0: OFF
0: No
WSW30
Setting and Specifications
30
1: ON
1: Yes