Preparation; How To Access The Object Component - Brother MFC5100C Service Manual

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the modular jack of the telephone line,
- the PC interface cable if connected (Not shown below), and
- the modular jack of an external telephone set if connected (Not shown below).
(2) Remove
- the paper wire extension and
- the paper tray.
NOTE: Do not remove the ink cartridges when disassembling the machine except when removing
the print head unit.

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object components.
To remove the purge unit, for example, first find it on the flow and learn its number (
case). You need to remove parts numbered
purge unit.
• Unless otherwise specified, the disassembled parts or components should be reassembled in the
reverse order of removal.
, , ,
4 -4
, , and so as to access the
in this