Brady Tagus User Manual page 88

Step Operator Action
13
FWD
Using the
Gain Number determined in Step
12. Press the
the setting.
14 Place the media in the Media
Sensor. Record the sensor reading
and label it 'P' (paper).
Place the backing, mark, or notch
in the Media Sensor. Record the
sensor reading and label it 'G' or 'M'
(Gap or Mark).
Remove all media. Record the
sensor reading and label it 'E'
(Empty).
15
Press the
FWD
the Key.
5-42 Rev A
Key, select the
GAIN TRAN <yyy> *00
<0 - 31>
Key to select
Or for reflective media:
GAIN RFL <yyy> *00
<0 - 31>
GAIN TRAN <yyy> *08
<0 - 31>
Or for reflective media:
GAIN RFL <yyy> *08
<0 - 31>
Key. Then press
ADVANCED ENTRY
SENSOR LEVEL
Displayed Message Comment
Selection is denoted with an '*'.
Where 'yyy' is a numerical
value representing the current
sensor reading.
The sensor readings must be
manually entered into the
printer now.
Quick Test Mode