User Defined Label; Media Sensor Calibration - Brady Tagus User Manual

5.4.6

User Defined Label

The User Defined Label reprints from a list of previously printed label formats. Use the
FWD
Key to scroll through the listing, then use the
label.
Note: If a job was cancelled prior to its completion, or if power has been
removed since the last print job and the request for this label, 'NO FILES
AVAILABLE' will be displayed and no printing will occur.
5.4.7

Media Sensor Calibration

In addition to the Sensor Type selection, Media Sensor calibration ensures that each label is
detected correctly and reliably. Perform calibration when the 'Uncalibrated' message is
displayed. Three different methods are available to calibrate the printer: Quick, Standard,
and Advanced Entry.
5-34 Rev A
Key to select and print the
Quick Test Mode