Brady Tagus User Manual page 63

System Settings (continued)
DPL EMULATION ♦
(not available with T-300)
STANDARD
ALLEGRO
PRODIGY PLUS
PRODIGY
COLUMN EMULATION ♦
* Not available in T-300
203 in (180 - 250)
The Menu System
Determines SOP Emulation (start of print (<STX>O)) see above,
Column Emulation (see above), positions barcodes as does selected
printer.
Start of print 220; the below exceptions are disabled.
Allegro, Prodigy Plus, and Prodigy emulations enabled:
•
Data Terminator – I 2 of 5 Barcodes (IDs D, J, and L), the first
non-numeric character processed will terminate the barcode data
field.
•
Bar Size – I 2 of 5 Barcode (ID L), when the bar size is specified
greater than P (25), the size is automatically decreased to 10.
•
Human Readable Fonts – The EAN and UPC barcodes (IDs B, C,
F, G, M, and N) print a fixed font size.
•
Lines and boxes: Rotations 2 and 4 are affected by the vertical
multi-plication factor defined in the DPL Dxx command.
•
Column positions greater than the printhead width are adjusted
back to the printable area and printed.
•
Barcodes (rotation 3, upside down / right to left) with row position
less than barcode height result in row position equal to barcode
height, that is, barcodes falling off label leading edge are pushed
back onto the label.
•
<STX>L (Label Command) followed by no printable fields result in
no paper movement. (When disabled a blank label is printed).
Allegro Only:
The row position is calculated based on 194 DPI.
Compensation for location of column position 0 via columnar dots per
inch (dpi) emulation
Dpi emulation, smaller numbers shrink text from right to left.
5-17 Rev A